How To Clean Rc Nitro Paper Air Filter

In this article we will explore why and how you have to make clean your nitro air filter.

Why-to

If you are running a nitro RC car sooner or later y'all will have to clean your nitro air filter, hopefully sooner. Here'south what it's all about, a clean air filter allows more air in your nitro engine. Anybody knows that more air equals more power, so a clean air filter is one style of getting the most power out of your engine.

How often should you lot clean your nitro air filter depends on where you run your motorcar. Every bit a general rule, if yous run your RC car on an on-road make clean track you can get away with fewer cleanings. On the other manus if you run your RC car on dirty parking lots, around the neighborhood with lots of grit or off-road more than frequent cleanings are required. The style I see it clean your air filter after the day's cease of bashing or racing and so yous have a clean air filter the side by side time out.

How-to

The good news is cleaning the nitro air filter is quite like shooting fish in a barrel. Remember before you pry off the air filter from your engines carburetor make certain to remove as much clay, grime and dust from the surrounding surface area with a castor or toothbrush. The fact is if this surface area is not make clean y'all run the risk of debris falling into your carburetor/engine when removing the air filter; this could toll tons in repairs.

When you remove the nitro air filter from the carb, close it (the carb) off with a carburetor cap if you have one if not but insert a clean newspaper towel. This way yous are certain nothing drops in your nitro engine by mistake.

If you lot run off road RC cars your filter chemical element tin be removed from the filter housing (most off-road cars have separate air filters and air filter housings). On route cars usually have the nitro air filter glued on the housing. Make clean the housing using lather and warm water. For the air filter itself y'all can blast it with a spray cleaner. Most spray cleaners, kind of swell up the filter element, I don't like that so I stick to plainly old soap and warm water. So soap up the filter element run rinse it out with warm water and repeat until it's completely make clean.

Now comes the hardest office. Doing nothing and waiting for it to dry. And don't forget never attach the filter on your nitro engine if information technology is damp or wet, you don't want to damage your engine with the water. Having said that, after the filter is completely dry (apply a clean paper towel to speed up the procedure) you have add oil the filter element. The way I see information technology an easy and make clean way to do this is drop your filter(s) in a zero lock bag add together a bit of air filter oil on the nitro air filter and squish information technology with your fingers to brand sure you get oil on the entire air filter. (No sticky oil hands with the zip lock bag). When you are sure you lot oiled the entire chemical element remove from plastic bag and remove the extra oil with a paper towel. All you take to do is squish the air filter with the paper towel until it barley leaves oil residue. Brand sure you remove all the oil from the air filter housing.

Now yous tin can reassemble the air filter and attach it to your RC automobile. Tip: us a zip-tie to secure the air filter to the carb, some cheap insurance to keep it in place in case you lot flip over, better safe than lamentable.

So there you take it now y'all know how to clean your air filter. A clean air filter protects your nitro engine while allowing maximum power.